Smart Card and RFID Reader
PRODUCT & SYSTEM
Apakah Anda memerlukan alat pembaca kartu atau smart card reader sebagai pelengkap atas implementasi smart card dan teknologi RFID pada aplikasi sistem informasi bisnis Anda?
Smart card reader memiliki kemampuan untuk membaca dan menulis data binari kedalam chip kartu dengan informasi yang diperlukan. Tersedia dalam computer connected, outdoor antena, bluetooth interface, Android reader dan lainnya.
The HID OMNIKEY® 5422 represents the ultimate combination of contact and contactless technology in a single device. The solution features a dual interface, PC-linked reader that reads / writes to both a 13.56MHz contactless smart card and virtually any contact smart card to support environments where both contact and contactless smart card technologies are required.
Compliant with ISO14443 A/B, ISO7816 standards, this reader is compatible with virtually any contactless smart card, operating system and a variety of applications.
The reader supports leading high frequency card technologies on the market including iCLASS®, MIFARE® and MIFARE DESFire® and was integrated and tested with HID Global’s ActivID® ActivClient and ActivID® Applets.
Designed for traditional clients as well as thin-client products and solutions.
Uses native CCID driver from operating system – no additional drive installation required.
Supports a broad range of operating systems and works with the native CCID driver and PC/SC-API from the operating system. Windows, Linux, Apple and Android*.
Supports contactless smarts cards with up to 848 Kbps in the fastest ISO 14443 transmission mode.
Interoperable with various smart card technologies, tags and standards such as ISO 14443 A/B, ISO 7816, Seos® (OTP only)
Support for HID Global solutions: ActivID® ActivClient, ActivID® Applets, and HID Trusted Tag® Service.
e-Government
Banking & Payment
e-Healthcare
Access Control
Network Security
Public Key Infrastructure
e-Purse & Loyalty
Identiv’s uTrust (iCloud) 4701F is the ideal combination of contact, contactless, and NFC technologies in just one single device.
Supporting ISO/IEC 7816 contact cards, 13.56 MHz contactless technology, and NFC, this PC-linked dual interface reader features end-user environments where virtually all kinds of credentials are being used, even in mixed populations.
The Mighty All-in-One :
Features contact, contactless, Lascom, and NFC tech
Supports mixed credential populations
Supports major card ICs, standards, and technologies
Comfort, Style, and Speed :
Ergonomic operation
Modern housing design
848 kbps in ISO/IEC 14443 and 600 kbps in ISO/IEC 7816
Flexible NFC Tech :
Network log-on and secure web-based transactions
Government apps, like online tax declarations
Customer loyalty programs
e-Government
e-Banking and e-Payment
e-Healthcare
Transportation
Network Security
Access Control
Automatic Fare Collection
Public Transportation Terminal
Loyalty Program
The ACR122U NFC Reader is a PC-linked contactless smart card reader/writer developed based on the 13.56 MHz Contactless (RFID) Technology. Compliant with the ISO/IEC18092 standard for Near Field Communication (NFC), it supports not only Mifare and ISO 14443 A and B cards but also all four types of NFC tags.
The ACR122U NFC Reader is ideal for both secure personal identity verification and online micro-payment transactions. Other applications of the ACR122U include access control, e-payment, e-ticketing for events and mass transit, toll road fare collection and network authentication.
USB 2.0 Full Speed Interface
CCID Compliance
Smart Card Reader:
Read/write speed up to 424 kbps
Built-in antenna for contactless tag access, with card reading distance of up to 50 mm (depending on tag type)
Supports ISO 14443 Type A and B cards, Mifare, FeliCa, and all 4 types of NFC (ISO/IEC 18092) tags
Built-in anti-collision feature (only 1 tag is accessed at any time)
Application Programming Interface:
Supports PC/SC
Supports CT-API (through wrapper on top of PC/SC)
Peripherals:
User-controllable bi-color LED
User-controllable buzzer
e-Government
e-Banking and e-Payment
e-Healthcare
Transportation
Network Security
Access Control
Automatic Fare Collection
Public Transportation Terminal
Loyalty Program
ACR1281U-C1 DualBoost II is the second generation of ACS’s ACR128 DualBoost reader. It is a dual interface reader that can access any contact and contactless smart cards following the ISO7816 and ISO14443 standards. ACR1281U-C1 DualBoost II enables one to integrate conventionally separate and independent applications for contact and contactless technologies into one device and one card. It can be used for online transactions to settle payments securely using credit cards, and it can also be used for topping up contactless cards in automated fare collection systems. It provides the perfect complement to the all-in-one card concept that combines many kinds of smart card applications in just a single card.
The DualBoost series has PC/SC compliance for both contact and contactless interfaces. It makes use of high-speed communication for contactless cards at a maximum of 848 kbps, which makes it suitable for highly demanding applications. It also provides intelligent support for hybrid and combi cards, such that it detects a contactless card even that has been incorrectly placed in the contact card slot. Lastly, the DualBoost has a built-in SAM slot for added security in both contact and contactless applications.
USB 2.0 Full Speed Interface
CCID Compliance
Contactless Smart Card Reader:
Read/write speed of up to 848 kbps
Built-in antenna for contactless tag access, with card reading distance of up to 50 mm (depending on tag type)
Supports ISO 14443 Part 4 Type A and B cards and MIFARE series
Built-in anti-collision feature (only one tag is accessed at any time)
Supports extended APDU (max. 64 kbytes)
Contact Smart Card Reader:
Supports ISO 7816 Class A, B and C (5 V, 3V and 1.8 V)
Supports CAC (Common Access Card)
Supports PIV (Personal Identity Verification Card)
Supports microprocessor cards with T=0 or T=1 protocol
Supports memory cards
ISO 7816-compliant SAM slot
Application Programming Interface:
Supports PC/SC
Supports CT-API (through wrapper on top of PC/SC)
Built-in Peripherals:
Two user-controllable LEDs
User-controllable buzzer
USB Firmware Upgradability
e-Government
Banking & Payment
Access Control
Network Security
e-Purse & Loyalty
Transportation
With the rapid growth of technology comes increases in electronic data theft. This emphasizes the need to secure electronic data, and therefore the integration of smart card technology into current IT infrastructures. Following this trend, ACR38U-I1 smart card reader series combines sophisticated technology and modern design to meet stringent requirements in smart card-based applications, such as payment systems and electronic identification, where a high level of security is becoming more essential.
Being compliant with the CCID specification, ACR38U-I1 features plug-and-play readers to eliminate the need for driver installation and driver-system compatibility assessment.
ACR38U-I1 is compliant with ISO 7816 and EMV Level 1 specifications. It supports ISO 7816 Class A, B and C ( 5V, 3 V and 1.8 V) cards, including all microprocessor cards with T=0, and T=1 protocols, as well as most of the popular memory cards in the market.
Supports ISO 7816 Class A, B and C (5 V, 3 V, 1.8 V) card
Supports CAC (Common Access Card)
Supports PIV (Personal Identity Verification) Card
Supports microprocessor cards with T=0 or T=1 protocol
Supports memory cards:
Cards following the I2C bus protocol (free memory cards), including:
Atmel: AT24C01 / 02 / 04 / 08 / 16 / 32 / 64 / 128 / 256 / 512 / 1024
SGS-Thomson: ST14C02C, ST14C04C
Gemplus: GFM1K, GFM2K, GFM4K, GFM8K
Cards with intelligent 256 bytes EEPROM and write protect function, including: SLE4432, SLE4442, SLE5532, SLE5542
Cards with intelligent 1K bytes EEPROM and write-protect function, including: SLE4418, SLE4428, SLE5518, SLE5528
Cards with ‘104’ type of EEPROM non-reloadable token counter cards, including: SLE4406, SLE4436, SLE5536, SLE6636
Cards with secure memory IC with password and authentication, including: AT88SC153, AT88SC1608
Cards with Intelligent 416-Bit EEPROM with internal PIN check, including: SLE4404
Cards with Security Logic with Application Zone, including: AT88SC101, AT88SC102, AT88SC1003
Supports PPS (Protocol and Parameters Selection)
Features Short Circuit Protection
Application Programming Interface:
Supports PC/SC
Supports CT-API (through wrapper on top of PC/SC)
e-Government
Banking & Payment
e-Healthcare
Access Control
Network Security
Public Key Infrastructure
e-Purse & Loyalty
ACR39U is the ideal peripheral for your smart card solutions. This PC-linked smart card reader boasts of greater speed than any of its predecessors. It also covers a broad array of applications by supporting ISO7816 Class A, B, and C smart cards; microprocessor cards with the T=0, T=1 protocol; and a wide variety of memory cards, including the US Department of Defense Common Access Card (CAC).
This plug-and-play USB device is also compliant with PC/SC and CCID specifications, runs on various operating systems such as Windows, Linux and Mac, and may even be used with mobile applications running on Android™ 3.1 or higher. EMV Level 1 and PBOC-certified, it is ideal for e-banking, and e-payment applications. With ACR39U, ACS has brought users a PC-linked reader that is faster and more powerful, for better-performing smart card applications.
Supports ISO7816 Class A, B and C (5 V, 3 V, 1.8 V) cards
Supports microprocessor cards with T=0 or T=1 protocol
Supports memory cards such as:
Cards following the I2C bus protocol (free memory cards) with maximum 128 bytes page with capability, including:
Atmel®: AT24C01/02/04/08/16/32/64/128/256/512/1024
SGS-Thomson: ST14C02C, ST14C04C
Gemplus: GFM1K, GFM2K, GFM4K, GFM8K
Cards with intelligent 1k bytes EEPROM with write-protect function, including: Infineon®: SLE4418, SLE4428, SLE5518 and SLE5528
Cards with intelligent 256 bytes EEPROM with write-protect function, including: Infineon®: SLE4432, SLE4442, SLE5532 and SLE5542
Supports PPS (Protocol and Parameters Selection)
Features Short Circuit Protection
Application Programming Interface:
Supports PC/SC
Supports CT-API (through wrapper on top of PC/SC)
e-Government
Banking & Payment
e-Healthcare
Access Control
Network Security
Public Key Infrastructure
e-Purse & Loyalty
The ACR123U is the USB version of the ACR123S, a cost-effective, flexible and intelligent contactless reader. It can be integrated to existing (Point-of-Sale) terminals or cash registers, to offer the convenience of a cashless payment system. The ACR123U speeds up movement in checkout counters, by enabling customers to complete payments by simply tapping their cards.
The ACR123U is equipped with a large graphical LCD that allows merchants to display messages, as well as a large tapping area with backlight, which guides customers in carrying out their payment transactions. Developed based on 13.56 MHz contactless (RFID) technology, it supports any contactless card following the ISO 14443-4 standard. It is also equipped with a large graphical LCD, as well as a large user-controllable tapping area with backlight.
USB interface for Data Communication and power supply
ARM 32-bit CortexTM-M3 Processor
Smart Card Reader :
Read/Write speed of up to 848 kbps
Built-in antenna for contactless card access, with card reading distance of up to 50 mm (depending on tag type)
Support for ISO 14443 Part 4 Type A and B cards and MIFARE series
Built-in anti-collision feature
Three ISO 7816-compliant SAM slots
Built-in Peripherals :
16 alphanumeric characters x 8 lines Graphical LCD (128 x 64 pixels)
Four user-controllable LEDs (Blue, Yellow, Green, and Red)
User-controllable tapping region backlight (Red, Green and Blue)
User-controllable speaker (Audio tone indication)
Banking & Payment
e-Healthcare
e-Purse & Loyalty
Transportation
The ACR1252U USB NFC Reader III is an NFC Forum-certified PC-linked reader, developed based on 13.56Mhz contactless technology. It has a SAM (Secure Access Module) slot which can be used together with a SAM card for key diversification and mutual authentication, providing high-level security in contactless transactions. Post-deployment firmware upgrade is also supported, eliminating the need for additional hardware modification.
ACR1252U is capable of the three modes of NFC, namely: card reader/writer, card emulation and peer-to-peer communication. It supports ISO 14443 Type A and B cards, MIFARE®, FeliCa, and ISO 18092–compliant NFC tags. It also supports other NFC devices with an access speed of up to 424 Kbps and proximity operating distance of up to 50mm (depending on tag type used).
USB 2.0 Full Speed Interface
CCID Compliance
USB Firmware Upgradeability
Smart Card Reader:
Read/write speed up to 424 kbps
Built-in antenna for contactless tag access, with card reading distance of up to 50 mm (depending on tag type)
Supports ISO 14443 Type A and B cards, MIFARE, FeliCa, and all 4 types of NFC (ISO/IEC 18092) tags
Supports MIFARE 7-byte UID, MIFARE Plus and MIFARE DESfire
Built-in anti-collision feature (only 1 tag is accessed at any time)
One ISO 7816–compliant SAM slot (Class A)
NFC Support:
NFC Reader/Writer Mode
Peer-to-Peer Mode
Card Emulation Mode
Application Programming Interface:
Supports PC/SC
Supports CT-API (through wrapper on top of PC/SC)
Peripherals:
User-controllable bi-color LED
User-controllable buzzer
SAM Slot
e-Government
Banking & Payment
e-Healthcare
Access Control
Network Security
e-Purse & Loyalty
Transportation
Smart Poster
P2P Communication
Duali DE-620 is a NFC-enabled multiprotocol contact/contactless card interface device with modern slim design.
It shows stable and high performance, fully interoperable with other devices supporting various contactless/contact applications such as cards, tags, dongles, wristband and NFC mobiles.
Combines ISO 7816 contact and ISO 14443 contactless within one device
PC/SC compliant, Proprietary Mode
DUALi SDK, FDK available for Easy Development
Easily upgradeable download of the latest firmware
Special SDK(NFC tag Manager) for NFC developer
Interface USB 2.0
Contactless Communication ISO 14443 A/B, ISO 18092 (NFC), Mifare, DESFire, FeliCa
NFC forum tag type 1~4, NFC P2P
Contactless speed 106/212/424/847kbps, up to 424kbps for NFC P2P
Contact Card Interface 1 ID + 1 SAM slot (SIM type, ISO7816, T=0, T=1)
Certification CE, FCC, Telec certified, RoHS complaint
Identification System
Card Issuing System
Card Operating System Development
NFC/ e-Payment System
Long range RFID reader RF200 is a high performance UHF RFID integrated reader. It is designed upon fully self-intellectual property. Based on proprietary efficient digital signal processing algorithm, it supports fast tag read/write operation with high identification rate.
It can be widely applied in many RFID application systems such as logistics, access control, and anti-counterfeit and industrial production process control system.
Self-intellectual property.
Support ISO18000-6B, ISO18000-6C(EPC C1G2) protocol tag.
Work at 902 – 928MHz frequency band (frequency customization optional).
FHSS or Fix Frequency transmission.
RF output power up to 30dbm (adjustable).
Antena with 8 dbi configuration, typical reading distance ≥ 5m.
Support auto-running, interactive and trigger-activating work mode.
Low power dissipation with single +9 DC power supply.
Support RS232, RS485, wiegand interface.
Provide DLL and demo software code to facilitate further development.
Size: 235mm × 235mm × 57mm, Circular polarization.
Weight: 2.5kg.
Logistics tracking
Access control
Anti-counterfeit
Industrial production process control system
Parking and Gate System